Subtotal:
  
                           Checkout

Cart

Close

ATN PS31-3 Night Vision Goggle - USA Gen 3

SKU NVGOPS3130      CID 159710
atn ps31 3 night vision goggle usa gen 3

Free Shipping!! (within lower 48)

Purchase PS31-3 Night Vision Goggle - USA Gen 3


Free tmA adapter with Swarovski tM35 purchase. See details below. Free tmA adapter with Swarovski tM35 purchase. See details below.
The ATN PS31-3 Night Vision Goggle - USA Gen 3 is a dual tube (binocular vision) goggle designed for stereo vision for navigating on foot or in a vehicle. It is one of the smallest and lightest units of its type. The US made Gen 3 image intensifier tubes are auto-gain capable so they can adjust to the current light level. System resolution is increased over other models. A 50° field of view allows for maximum awareness of your surroundings.

Ergonomically, the PS31-3 is vastly superior to its predecessor PS15. In addition to the weight reduction which improves balance while attached to a head harness or helmet, the tubes are individually hinged to allow for monocular use if needed, and also to allow it to flatten against the head or helmet when raised out of the way.

Generation: Gen 3
Resolution (lp/mm): 64-72 lp/mm
Close Focus: .75 ft.
Magnification: 1
Field of View (°): 50 °
Battery type: 1 3v (CR123)
Battery life: 60 hrs, up to 300 with optional battery pack
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Yes
Video Output No
Product Weight (oz): 20.5 oz.

Included In The Box

ATN offers a limited lifetime warranty on all products only for manufacturer defects in materials or workmanship from the factory.

This ATN Warranty does not cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse; (c) subjected to alterations, modifications or repairs by the Customer or by any party other than ATN Corp. without prior written consent of ATN Corp.; (d) special order or "close-out" merchandise or merchandise sold "as-is" by either ATN Corp. or the ATN Corp. dealer; or (e) merchandise that has been discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of ATN Corp.. ATN Corp. shall not be responsible for any defects or damage that in ATN Corp.'s opinion is a result from the mishandling, abuse, misuse, improper storage or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer.


Other Models in This Line

to top