The ATN NVM14-4 Gen 4 Night Vision Monocular is a hand-held, head-mounted, helmet-mounted, or weapon-mounted night vision system that enables walking, driving, weapon firing, short-range surveillance, map reading, vehicle maintenance, and administering first aid in both moonlight and starlight. Each unit allows for vertical adjustment (by using head straps), fore-and-aft adjustment, objective lens focus, and eyepiece focus. The device is also equipped with an infrared light-emitting source. NVM14-4 Night Vision monocular utilizes the principle of intensification of the residual light which is reflected from the surrounding objects. The optical system of the monocular consists of: an objective lens, an image intensifier tube and an eyepiece. 4th Generation tubes are Autogated/Filmless IITs. The filmless micro channel plate provides a higher Signal-to-Noise Ratio than standard Gen. 3, resulting in better image quality under low-light conditions. An Autogated power supply further improves image resolution under high light conditions and a reduced "Halo" effect that minimizes interference from bright light sources. Highlights of the Gen 4 specifications are the typical SNR of 24 and resolution of 64-72 lp/mm.
Note: This product is Not available for export.
ATN offers a limited lifetime warranty
on all products only for manufacturer defects in materials or workmanship from the factory.
This ATN Warranty does not cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse; (c) subjected to alterations, modifications or repairs by the Customer or by any party other than ATN Corp. without prior written consent of ATN Corp.; (d) special order or "close-out" merchandise or merchandise sold "as-is" by either ATN Corp. or the ATN Corp. dealer; or (e) merchandise that has been discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of ATN Corp.. ATN Corp. shall not be responsible for any defects or damage that in ATN Corp.'s opinion is a result from the mishandling, abuse, misuse, improper storage or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer.