Shopping Cart


Zeiss Victory RF 10x45 T* Binocular RangeFinders

SKU 52 45 18      CID 22057

Free Shipping!! (within lower 48)

Purchase Victory RF 10x45 T* Binocular RangeFinders

Quantity add to cart

The Zeiss Victory RF 10x45 range-finding binocular is made with fluoride glass and the Zeiss T* multi-coating for the most brilliant, razor sharp image possible. Weighing just 35 ounces (feather-light for a 56-mm range-finding binocular) and offering one-touch true ballistic ranging, the Victory RF 10x45 has LotuTec-coated 45-mm objective lenses, and is completely waterproof and nitrogen-filled.

Included In The Box

  • CR 2 (Lithium 3V) Battery
  • Tethered push-on objective caps
  • Eyepiece rainguard
Zeiss offers a Limited Lifetime Transferable Warranty which protects you against defects in workmanship or materials for the life of the Product. If a defect that is covered by this Warranty is found, Carl Zeiss will, at its option and without charge, either repair your Product or replace it with a Carl Zeiss product of comparable specifications and value.
Additionally Zeiss offers A No-Fault Policy for CONQUEST HD and VICTORY HT binoculars (for up to 5 years after purchase, and only valid if your product is registered within 60 days of purchase.)

For Service and Repair questions call 800-441-3005

The Zeiss Victory 10x45 T* Binoculars feature wonderful innovations like:

  • BIS™ – Ballistic Information System - The fully integrated electronic ballistic calculator (BIS™) will give you the correct holdover, based on the distance measured, and the load trajectory you have pre-selected.
  • Ballistic Programs - You can select one of the six ballistic programs, depending on your ammunition. The calculator allows you to select both ballistic curve and sight-in distance independently, enabling the use of both conventional 100-200 yard zeros, and two European systems of “optimum sighting distances”.
  • The “One Touch” Principle of the Rangefinder - When the range-finder button is pressed, the aim-point lights up so that you can easily sight your target. After releasing the button, the distance is displayed in yards or meters. When the Ballistic Information System (BIS™) is activated, the holdover value is shown shortly after the distance.
  • Three Functions of the Set Button - With the set button you can:
    • turn the Ballistic Information System (BIS™) on or off
    • select the ballistic program to match your load’s trajectory
    • select the desired unit of measurement (meters/centimeters or yards/inches)

Other Models in This Line
to top